Tein Flex Z Onderstel Mitsubishi Lancer Evolution 7-8-9 - TUV Goedgekeurd
Tein Flex Z for Mitsubishi Lancer Evolution 7-8-9
A direct evolution of the previous Flex Street, the new Flex Z range has been developed to combine both comfort and performance for sporty drivers. In order to provide the best pricing, engineers at Tein have completely re-designed the Japanese production plant and manufacturing processes (see video below). As a result, this offers the best quality/price ratio ever offered from Tein.
Thanks to their oil and gas twin-tube design, Flex Z offers excellent comfort at low speeds on rough roads, whilst providing outstanding performance and accuracy in fast driving - on road and circuit. The ride height and spring preload are adjustable separately, giving full damper stroke at any height. A new oil formulation was used for Flex Z, giving stable performance at all temperatures.
Adjustability
For Evo 7-9
- Set the ride height Front between -10mm down to -97mm (Setting out of the box -40mm)
- Set the ride height Rear between +22mm down to -68mm (Setting out of the box -30mm)
- Front spring is 10.0kg
- Rear spring is 8.0kg
Features
- Separate ride height and spring preload adjustment.
- Compatible with Tein EDFC (Ref. EDK05-12140)
- "Plug & play" fitment, no additional parts required
- Front: Bearing upper mounts (camber adjustment on McPherson suspension)
- Rear: Reinforced Rubber Upper Mounts
- Easy and cheap to repair - replacement dampers available from Tein
Damping is adjustable via 16 stages. Tein Flex is compatible with Tein EDFC (available separately), for adjusting damper stiffness electronically from inside the car. With EDFC, the level of adjustment is increased to 32 stages (EDFC standard) and 64 stages (EDFC Active).
These coilovers come with aluminium upper mounts, allowing camber adjustment on front McPherson suspension. Using Japanese manufacturing, Tein products enjoy a long lifetime and protection against corrosion, dust and temperature change. They also come with a 1 year warranty.
Tein Flex Z use a sealed damper from the factory. Replacements are only possible using a complete damper unit, which are low cost and quick to replace.
Tein Flex A, however, uses a fully rebuildable damper. A rebuild/overhall service is available from Tein.
Tein Flex Z and Flex A are guaranteed for 1 year.
Dit product is compatibel met volgende voertuigen
| Voertuig Merk: | Voertuig Model: | Voertuig Variant: | Vanaf: | Tot: | Motorcode: | Notes |
| Mitsubishi | Lancer | Evolution VII | 2001 | 2003 | 4G63 | 2.0L - 4WD Petrol |
| Mitsubishi | Lancer | Evolution VIII | 2004 | 2005 | 4G63 | 2.0L - 4WD Petrol |
| Mitsubishi | Lancer | Evolution IX | 2006 | 2008 | 4G63 | 2.0L - 4WD Petrol |
Filter eenvoudig aan de linkerkant op uw auto om erachter te komen welke Tein schroefset of Tein S-Tech verlagingsveren er beschikbaar zijn.
Komt u er niet uit? Bel dan gerust voor advies. Wij zijn er om u bij te staan!
Tein EDFC 2
The original EDFC, which has been popular for the past decade, is to be reborn as "EDFC II" with a n..
€229,42 Excl. BTW: €189,60
Tein Motor Kit M12-14
Compatible kit varies by vehicle models and types of shock absorbers.....
€152,46 Excl. BTW: €126,00
Tein EDFC Strut Kit
Prevents wires from getting tangled up with motors when adjusting ride height...
€36,30 Excl. BTW: €30,00
