K1 I-Beam Set 5 - Ford Focus RS MK2
The K1 Technology Conrod set for the Ford Focus RS MK2 and Volvo B5254T4 engine are the RACEREADY connecting rods, at a very affordable price. Used by many Ford Focus RS MK2 owners worldwide, these rods have proven to do their job more than once! Building your engine with lots of safety margin will give your trackday a safer feeling. No need to worry when driving over 400hp on the Nurburgring, your engine will remain safe for the whole season. It won't be these rods that give up!
These rods come with ARP2000 material rodbolts as standard. Combine these rods with Wiseco pistons (see below) and ARP head studs + ARP Main studs, a set of Glyco bearings and you're almost good to go!
Connecting Rod Specifications:
Type: I-Beam
Length: 143.0mm
Housing Bore: 53.006
Pin Diameter: 23mm
BE Width: 25.650
PE Width: 21.950
Bolt Size: 3/8
Weight: Call
Dit product is compatibel met volgende voertuigen
| Voertuig Merk: | Voertuig Model: | Voertuig Variant: | Vanaf: | Tot: | Motorcode: | Notes |
| Ford | Focus | RS MK 2 | 2009 | 2011 | JZDA | 2.5L - FWD Petrol |
| Ford | Focus | RS MK 2 500 | 2010 | 2011 | JZDA | 2.5L - FWD Petrol |
K1 Technologies produces "RACEREADY" rods and cranks at very affordable prices. Our connecting rods and crankshafts are a cut above the average imported rod. They are made to our designs and are held to some of the tightest accepted tolerances in the racing industry. More attention is shown to finish work than comparable products. A wide variety of sizes and applications are available, from the Sport Compact sizes through Small Block and Big Block Chevy and Mopar, including some custom and specialty sizes. Our unique design, which is original to the K1 Technologies line of connecting rods, saves weight without sacrificing strength. We use ARP bolts exclusively.
Quality and Materials
Premium 4340 steel is used to manufacture all of our connecting rods and crankshafts. We only use ARP fasteners, with ARP 2000 included standard and 625+ Custom Age bolts available as an upgrade. Bearing bore tolerances are held to +/-.0001". Bronze bushings allow for a full-floating pin. Press-fit pins are available on some rod sizes.
Process
All of our crankshafts are made from 4340 material; core hardened for increased tensile strength and fatigue life and are 100% mag particle inspected. Bearing surfaces are polished and nitrided for wear resistance. Before any finish work is done, our rods are 100% mag particle inspected. ARP bolts are installed and tightened to our exacting specifications prior to honing to insure accurate and repeatable bore geometry. All K1 Technologies connecting rods are honed in-house and sizes are held to some of the tightest accepted tolerances in the industry. Rods are weight-matched into sets and boxed, with the rotating, reciprocating and total weights noted for convenient use in the balancing process.
-
K1 Technologies
- Model: K1-344DW21143
- Beschikbaarheid: Op voorraad
- RRP: €1.070,56 (incl. BTW)
- Excl. BTW: €884,76
ARP Ford 2.5L B5254 5cyl '05 & later main stud kit
ARP Ford 2.5L B5254 5cyl '05 & later main stud kit..
€671,75 Excl. BTW: €555,17
Wiseco Piston Kit 83.00mm Ford Focus RS MK 2
The pistons are made from the 4032 wrought aluminium alloy are designed for high performance appli..
€1.091,93 Excl. BTW: €902,42
Wiseco Piston Kit Ford MkII Focus RS, 83.50mm. CR8.5:1
One of Wiseco most popular selling piston kits for the Ford Focus RS MKII 2.5 engine or Volvo S60R B..
€1.176,50 Excl. BTW: €972,31
JE-Pistons Ford Focus RS MK2 2.5L 20V 83.00mm (8.5:1)
Bore (mm)83.00Over SizeSTDComp Ratio8:5:1Pin23With over 50 years experience, JE Pistons is the world..
€319,56 Excl. BTW: €264,10