DeatschWerks set of 8 injectors 60lb/hr

DeatschWerks set of 8 injectors 60lb/hr

Set of 8 60lb injectors for Chevrolet Camaro Z28/SS LS1 98-02, Corvette LS1 97-04, Corvette Z06 LS6 01-04, Pontiac Firebird Formula/Trans Am LS1 98-02, GTO 2004 LS1, Ford Mustang GT 85-04, Ford F150 Lightning 99-04 and Cadillac CTS-V 04-05 5.7 LS6


All DeatschWerks injectors feature the following:

  • E85 compatibility
  • Flow rates and set balancing in-house by DeatschWerks
  • Flow balanced to within 1-2% (flow report included)
  • Excellent spray pattern and atomization for optimized idle and tuning
  • Technical assistance and tuning data available via phone or email
  • 3-year comprehensive warranty

Download The Ford Calibration Summary

Download GM Calibration Data

Download Injector Characterization Summary

Matched set of 8 injectors 60lb/hr

 

Fuel Pressure Range40-80 psi
Minimum Pulse Width1.0 ms
Maximum Duty Cycle93%
Coil Impedance12.4 ohm
Injector TypeBosch EV14 (long)
Connector Typeus-car

 

Nominal Static Flow Rate

 

PSI >4358708090100
cc/min349412455483524544
lb/hr33.239.243.346.049.951.8

Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.

 

Offset In Milliseconds (Pressure Vs Voltage)

 

PSI >
VOLTS v
4358708090100
82.352.823.368.008.008.00
91.882.022.342.543.003.63
101.531.581.891.882.062.15
111.211.281.631.571.651.69
120.951.081.361.331.391.36
130.820.941.181.131.201.13
140.720.791.090.981.040.99
150.580.660.980.860.910.85
160.440.540.820.730.780.70

DeatschWerks take a unique approach to high flow fuel injectors. The competitors offer only a couple different styles and sizes of injectors. Their customers are left to their own means to choose the right injector and figure out how to fit them to their car. Making a universal injector fit can be time consuming and often involves expensive fuel rails, spacers, o-rings, and electrical connectors. At DeatschWerks, injector offering is application specific. Their injectors are engineered to fit your OE harness, OE fuel rail and OE manifold. DeatschWerks customers will spend less time installing, less time tuning, and more time enjoying the increased performance of their car.

DeatschWerks fitment is application specific, but quality is always universal. Your needs may vary from 440cc or 35 lb injectors for a mild bolt-on turbo daily driver to 2200cc or 200 lb injectors for a fully-built 1000hp track monster. Either way, you get the same attention to detail and quality.

  • Beta-testing – Before a new application is released, DW put the injectors in the hands of the best tuners for that specific application. They work with them closely and collect their feedback and make any necessary changes in fitment or flow characteristics. DW do this so that when the new application is released, their end customers have as great a success as possible.
  • QA testing – every injector that is thoroughly tested in-house. They perform a battery of over 20 different tests on every injector. These tests cover every aspect of the fuel injector including: flow rates, coil operation, atomization, spray pattern, and physical attributes.
  • Flow matching – DW only produce injectors in matched sets. They started this before anyone else in the industry and still do it today. DeatschWerks injectors are not only matched statically (open flow), but also dynamically (pulsed flow). In addition, larger sized injectors get dynamic matching at 3 different pulse widths – because when you are dealing with over 1,000cc/min of flow, even small variances can make a big difference in performance.
  • Warranty and Tech Support - DeatschWerks back all of their injectors with a comprehensive 3-year warranty.

Dit product is compatibel met volgende voertuigen

Voertuig Merk: Voertuig Model: Voertuig Variant: Vanaf: Tot: Motorcode: Notes
Chevrolet Camaro Z28 1998 2001 LS1 5.7L - RWD Petrol
Chevrolet Corvette C5 1998 2002 LS1 5.7L - RWD Petrol

Deatschwerks take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector they produce is a drop-in fitment for its application. Their injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold.

All Deatschwerks  high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Deatschwerks back all of their products with a comprehensive 12-month warranty. To complement their range of high performance, drop-in fitment fuel injectors, fuel system specialists, Deatschwerks, have developed the highest flowing in-tank fuel pump yet. With a flow rate of 300 litres per hour, the DW300 pump comes with an application specific or universal fitting kit and a 3-year warranty. The pump is 100% compatible with E85 ethanol fuel.

Deatschwerks also have developed two new high flow in-tank fuel pump ranges, the DW200 series; with a lower flow rate (around 255LPH) and price compared to the DW300 and the DW65c series; a compact pump with a flow rate of around 265LPH and a more compact design.

Geef beoordeling

Om een beoordeling te schrijven moet u inloggen of zich registreren
  • RRP: €770,01 (incl. BTW)
  • Excl. BTW: €636,37

Tags: DeatschWerks, Fuel Pump, Pump