Cusco Type MZ 1 Way Differential
Cusco Limited Slip Differentials are the best LSD's you can get for your vehicle. Whether you own a sports coupe, saloon, SUV or a racing competition car Cusco will have a Limited Slip Differential for your needs. If you get tired of one wheel peels or want to drift properly, or improve your lap times Cusco Type RS, Type MZ & Type Hybrid differentials will definitely take care of all that. 1 Way, 1.5 Way or 2 Way LSD's from Cusco are engineered and perfected in Japan and they are guaranteed to give you the most out of your driving experience.
The Difference Between 1 Way, 1.5 Way, and 2 Way LSD
CUSCO is the only manufacturer that provides a setting for all three options.
- 1 Way LSD is effective when load is applied to the differential (applied throttle load), and is not effective when load is not applied.
- 1.5 Way LSD is effective when load is applied to the differential (applied throttle load), and is half-effective when load is not applied.
- 2 Way LSD is effective both ways when there is load or no load applied to the differential.
2 Way LSD will be active during both acceleration and deceleration which enables to maintain the same slip rate during cornering. This results in an extremely controllable movement and eliminates any unexpected movements. The 2 Way also gives stability when braking into a turn and cures the braking oversteer characteristic.
1 Way LSD is not active during deceleration.
Both the 1.5 Way and 2 Way LSD are effective on and between acceleration and deceleration.
The Difference between Type MZ, Type RS and Hybrid Differentials
Type RS - Aggressive lock engagement - lower initial torque required. Recommended for Track use.
Type MZ - Track / Street friendly differential. Higher initial torque required to lock the differential.
Hybrid - This LSD combines the best qualities of the Type MZ & Type RS. Mostly suited for automatic transmissions and street driving.
A standard open differential is a component that transfers the rotational energy (torque) produced by the engine to the wheels. As the vehicle is making its turn, the inside wheel tends to rotate more slowly than the outer. If either of the wheel loses contact with the ground and is in a ‘floating’ state, the vehicle will lose all its traction capabilities and will not accelerate forward. (This open differential is only designed to provide smooth turning characteristics of the vehicle, thus made for the outside wheel to rotate more revolutions than the inner when making a turn.) *Assuming that Open Diff = Standard Factory Equipped Differential
An LSD system eliminates the uneven power distribution which tends to apply more rotational drivetrain energy to the wheel that has less grip. During aggressive driving (involving lots of turns), an LSD unit efficiently distributes the torque from the wheel with less grip capabilities to the wheel that has more, enabling more traction for the vehicle. (Basically, it eliminates the difference in rotation between the left and right wheel during a vehicle turn, with even power distribution to each wheel).
Type-RS SPEC-F / Type MZ SPEC-F (NEW!)
The Spec-F LSD feature a special at friction clutch plates which translates to a milder initial engagement when acceleration is ON or OFF. This setup is perfect for rear wheel drive setups in circuit situations, as well as minimizing powerloss for low horsepowered vehicles. The key is the newly designed inner tabbed at friction clutch plates combined with outer tabbed MZ plates enables a smooth and mild e ectiveness when most needed.
Features:
- Newly developed FFD (Flat Friction Disks)
- High precision polished disk surface for smooth and stable e ect
- Smooth LSD engagement with mild features perfect for street use
- Metal disk materials provide stability from low to high temperature
- Cold forged high strength cold chromoly gears for endurance and longevity
- Spec-F FFD is swappable with any existing Type-RS & Type MZ LSD units
Recommended For:
- Oversensitive LSDs during high speed cornering
- Time attack vehicles at a high speed track
- Minimise powerloss for underpowered vehicles
- More precise control on wet surfaces
- High grip tyres
Limited Slip Differential Applications:
Front Engine Rear Wheel Drive Cars
Front Engine Front Wheel Drive Cars
All Wheel Drive Cars
Type MZ limited slip differential is designed where the activation pressure opposes the direction of the initial torque with the utilization of the cone spring. The LSD operation first becomes engaged when the opposing pressures start working against one another.
The Type MZ features the highest rated initial torque rating than the rest of any other Cusco LSD models. This is due to the high pressure cone spring which engages full clutch pack lock at a linear rate.
Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components! Specialized cam profiles are available for custom orders.
1 way LSD
Specially suited for front wheel drive cars and AWD car front axles. Activates under acceleration, and acts as a true LSD when the throttle is off.
1.5 way LSD
Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.
2 way LSD
Recommended on rear wheel drive cars and AWD car rear axles. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.
All Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics the LSD by the combination of each plate and its designation of how it is stacked. Cusco's exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.
Dit product is compatibel met volgende voertuigen
| Voertuig Merk: | Voertuig Model: | Voertuig Variant: | Vanaf: | Tot: | Motorcode: | Notes |
| Mitsubishi | Galant | 1988 | 1992 | 4G63T | 2.0L - FWD Petrol | |
| Mitsubishi | Lancer | 1991 | 1995 | 4G92 | 1.6L - FWD Petrol | |
| Mitsubishi | Lancer | GTi | 1992 | 1995 | 4G93 | 1.8L - FWD Petrol |
| Mitsubishi | Lancer | Evolution I | 1992 | 1994 | 4G63 | 2.0L - 4WD Petrol |
| Mitsubishi | Lancer | Evolution II | 1994 | 1995 | 4G63 | 2.0L - 4WD Petrol |
| Mitsubishi | Lancer | Evolution III | 1995 | 1996 | 4G63 | 2.0L - 4WD Petrol |
| Mitsubishi | Mirage | Turbo Cyborg | 1987 | 1991 | 4G92 | 1.6L - 4WD Petrol |
| Mitsubishi | Mirage | Cyborg | 1989 | 1991 | 4G92 | 1.6L - 4WD Petrol |
| Mitsubishi | Mirage | MIVEC | 1991 | 1995 | 4G92 | 1.6L - FWD Petrol |
Cusco are one of the biggest premier tuners in the World, based in Japan, they have extensive experience in GT, Formula and World Rally Events. They design everything from suspension and chassis components to engine tuning, roll cages, intake systems, chassis under re-reinforcements and limited-slip differentials.
One of Cusco's biggest and more popular product ranges are the world-renowned Cusco Suspension. Click here to read more!
