AP Racing Master Cilinder Repair Kit 17.8mm

AP Racing Master Cilinder Repair Kit 17.8mm

INSTRUCTIONS:
1) 
Remove rubber boot (11) and circlip (13).
2) Carefully remove internal components.
3) Replace the following. (making sure all mseals have been lubricated with brake fluid). Primary seal (1), slydring Bearing (2)Piston Washer (4) D-Ring Piston Seal (5) and the O-Ring End Cap Seal 
(9). (Care must be taken when assembling seals as damage maybe caused).
4) 
Check bore is free from debris.
5) Lubricate bore with brake fluid.
6) Re-assemble internal components into body.
7) Use new circlip (13) to secure internal components and new boot to protect from debris (11).

Ref:

Description

Included in Repair Kit

 1.

Primary Seal 

 Yes

 2.

 Slydring Seal

 Yes

3.

M Cyl Return Spring

4.

Piston Washer

Yes

5.

 D-Ring Piston Seal

Yes

6.

Cut-Off Shim

7.

Piston

8.

End Cap

9.

O-Ring cap Seal

Yes

10.

Lock Nut 5/16" UNF

11.

Boot

Yes

12.

Spring Guide Pin

13.

Circlip

Yes

14.

Body

 


AP Racing are based in Coventry, UK. They have achieved more international sporting success than any of its rivals, establishing itself as a key supplier at all levels of international motorsport formulae, including single seat racing, rallying, sports car racing, stock car racing and touring cars. In 2011 alone, AP Racing supplied either brakes, clutches or both to 30 champions across the entire spectrum of the motorsport world.

Geef beoordeling

Om een beoordeling te schrijven moet u inloggen of zich registreren
  • RRP: €43,88 (incl. BTW)
  • Excl. BTW: €36,26