Milltek Particulate Filter-back Audi RS6 C8 4.0 V8 bi-turbo Polished Trims
PARTICULATE FILTER-BACK
OPF/GPF Back System (Twin 80mm) with Polished Oval Trims (Loudest) - Does not require cutting of the OE System
Audi RS6 C8 4.0 V8 bi-turbo (OPF/GPF Models) 2019 and Later
Audi RS6 C8 4.0 V8 bi-turbo (Non OPF/GPF Models - USA/ROW Models) 2020 and Later
Audi RS7 C8 4.0 V8 bi-turbo (OPF/GPF Models) 2019 and Later
Audi RS7 C8 4.0 V8 bi-turbo (Non OPF/GPF US/ROW Models) 2019 and Later
PARTS
MSAU770: LH Connecting Pipe to OE Downpipe Flange
MSAU771: RH Connecting Pipe to OE Downpipe Flange
MSAU744REP: LH Front Silencer Bypass
MSAU745REP: Rh Front Silencer Bypass
MSAU746: Active Valved Centre Section
MSAU747: LH Connecting Pipe
MSAU748: RH Connecting Pipe
MSAU749: LH Rear Section
MSAU750: RH Rear Section
MSAU751 x2: Valved Outlet Pipes
MSTIP269: LH Polished Oval Trim
MSTIP270: RH Polished Oval Trim
KEY FACTS
Pipe Ø: 3.15" (80.00mm)
Part-Box is part of Co-ordSport Netherlands and they are the only official distributor of Milltek Sport Performance exhaust systems in the Netherlands.
We are the largest stockists and keep many systems in stock which results in a fast delivery.
Milltek Sport exhausts are produced in high quality type-304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque.
A Milltek Catback Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your cars engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound.
-Outstanding looks
-Sporty but refined sound
-Lightweight and durable stainless steel
-Outstanding fit and quality
Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising.
Milltek Sport biedt een ruime selectie aan Performance Sport uitlaatsystemen welke constant uitgebreid wordt. Milltek Sport staat historisch bekend als maker van sport uitlaatsystemen voor voornamelijk Audi, Volkswagen en BMW. De goede reputatie van Milltek Sport heeft gezorgd voor een trouwe groep volgers. Door dit succes is besloten het assortiment enorm uit te breiden met merken als Ford, Toyota, Mercedes en Renault.
Inmiddels wordt Milltek Sport verkocht in meer dan 70 landen over de hele wereld.
Milltek Sport uitlaten worden gemaakt van hoge kwaliteit 304 luchtvaart kwaliteit staal. Dit materiaal is anti-magnetisch waardoor de uitlaten minder gevoelig zijn voor verkleuring. Dit type materiaal wordt gebruikt bij alle buizen en de volledige demper. De buizen worden mandrel gebogen om maximale flow te genereren en hiermee het maximaal haalbare vermogen te garanderen t.o.v. niet gebogen systemen.
-
Milltek Sport
- Model: SSXAU903
- Beschikbaarheid: Op voorraad
- RRP: €6.008,49 (incl. BTW)
- Excl. BTW: €4.965,70
Milltek Sport OPF Back Exhaust bolt on Black tips RS6 C8
PARTICULATE FILTER-BACKOPF/GPF Back System (Twin 80mm) with Cerakote Black Oval Trims - (Loudest) Do..
€6.132,32 Excl. BTW: €5.068,03