HKS Hipermax IV SP Suspension Nissan Skyline R34 GTR BNR34 & R33 GTR BCNR33

HKS Hipermax IV SP Suspension Nissan Skyline R34 GTR BNR34 & R33 GTR BCNR33
HKS Hipermax IV SP Suspension Nissan Skyline R34 GTR BNR34 & R33 GTR BCNR33
  • Model: 80250-AN003
  • Beschikbaarheid: Op voorraad
  • RRP: €2.323,20 (incl. BTW)
  • Excl. BTW: €1.920,00
Bestellen
Verlanglijst Product vergelijk
MAX IV SPCode No. 80250-AN003
 
 



▲The above photo is an item for GRB.

The sport model to have a comfortable drive even in the winding road.



Application　Specification
EngineRB26DETT
Model Year99/01 - 02/08
RemarksStock (V-Spec diffuser installed front & rear)
　
 FRONTREAR
Damping force adjustment30 steps30 steps
Base valve--
Height adjustable lower bracket○○
Upper mountSpherical bearingSpherical bearing
Inverted/Normal typeNormalNormal
Damper/Spring layoutCoiloverCoilover
Spring rate change at factoryPossiblePossible
Damping force adjustment with wire-○
Helper spring
(Spring rate N/mm)		-○ ( 19.8 )



Ride Heightmm
 Factory *2Test dataAdjustable range
High - Low *3		Drivable range
High - Low *4
FRONTRide height *1655642706 ～ 621706 ～ 638
Against stock-51-640 ～ -850 ～ -68
REARRide height *1663650699 ～　580699 ～　638
Against stock-36-490 ～ -1190 ～ -61
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.



Kit information
Spring of Full Kit
 FR
Spring rate N/mm(kgf/mm)118 ( 12 )98 ( 10 )
Free height (mm)200250
Spring typeStraightStraight
Recommended range to change spring rate N/mm(kgf/mm)±20 ( 2 )±20 ( 2 )
Specification of damper
 FR
Damping force (Rebound/Damping)N*2200 / 7001100 / 450
Default position of dial1515
Remaining damper stroke (Rebound/Damping)mm34 / 5165 / 105
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
 FR
DefaultTestDrivable limit
High *		Drivable limit
Low *		DefaultTestDrivable limit
High *		Drivable limit
Low *
Length of
case (mm)		285276305269488479524479
Spring
Set length(mm)		198198172198312312312322
Length to ride hight
adjuster (mm)		595010543128119164109
Lever ratio1.111.00
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information
 FR
Vehicle weight kg--
Tire size (Air pressure) kPa265 / 35 - 18 ( 230 )265 / 35 - 18 ( 230 )
Wheel size10.5 JJ × 18 inset 1010.5 JJ × 18 inset 10
Alignment
(Toe/Camber)		Test data0 mm / -3°30'in 3.5 mm / -3°16'
Standard valuein 1 ± 1 mm / -0°50' ± 0°45'in 2.6 ± 2.6 mm / -1°05' ± 30'
* Test data at HKS.



Parts List * It may be changed without prior notice.


Point
・Set for street to circuit drive.
・Set for high-grip radial tire handling specially.
・Set for stable movement at braking and weight shift controllability from front at braking to rear after clipping point. Specially set for handling with high-grip radial tire.