HKS Stopper Type Head Gasket t=1.6mm b=87.5mm Toyota Celica/MR2
HKS Metal Head Gaskets (2301-RT035) Metal Head Gasket, Stopper Type Bore : 87.5mm, Comp Ratio: 8.38:1, Thickness: 1.6mm
The Performance requirement from Head Gasket.
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure.
STOPPER TYPE HEAD GASKET
A high pressure seal is formed around the combustion chamber through the use of stoppers which create a step within the gasket for optimum sealing. By making the stopper part of the plate also allows the fold to be smaller while maintaining structural integrity. One side of the plate is completely flat meaning that it can be layered with the stopper to allow stoppers to be used in even the tightest of locations around the combustion chamber forming a high quality seal. Compared with other gaskets of the same thickness, there are more layers in these gaskets giving flexibility which allows the gasket to maintain a good seal even when the engine tries to vibrate and move.
Opposed Bead Stopper Type
If you don't have to worry about the distortion, you can use this to improve the sealing. This type is much better than bead type in matter of sealing. Opposed bead stopper type provide more balance in surface pressure.
Independent water hole type
Water holes and Head Bolt holes have "independent bead" that is the mainstream technology in motor racing. It reduces possibility of overheating even combustion gas leakage due to high horsepower. Because of the new design of bead shape around Head Bolt hole and water hole, crack around Head Bolt hole will be prevented.
HKS put all their know-how knowledge into engine parts from the data they have acquired from the drag race, round race, time attack and drift race. The HKS team provide Engine tuning ranging from Camshafts, Pulleys, Pistons and Rods to Timing Belts, Pump Upgrades and even Head Gaskets. The concept behind HKS engine products was to produce something the customers would truly be happy with.
Dit product is compatibel met volgende voertuigen
| Voertuig Merk: | Voertuig Model: | Voertuig Variant: | Vanaf: | Tot: | Motorcode: | Notes |
| Toyota | Celica | ST165 | 1988 | 1990 | 3SGTE | 2.0L GT-Four - 4WD Petrol |
| Toyota | Celica | ST185 | 1990 | 1992 | 3SGTE | 2.0L GT-Four - 4WD Petrol |
| Toyota | Celica | ST185 | 1992 | 1993 | 3SGTE | 2.0L GT-Four Carlos Sainz - 4WD |
| Toyota | Celica | ST205 | 1994 | 1996 | 3SGTE | 2.0L GT-Four - 4WD Petrol |
| Toyota | MR2 | SW20 | 1989 | 1993 | 3SGTE | 2.0L GT Turbo - RWD Petrol |
| Toyota | MR2 | SW20 | 1993 | 1999 | 3SGTE | 2.0L GT Turbo - RWD Petrol |
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.
For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.
-
HKS
- Model: 2301-RT035
- Beschikbaarheid: Vraag naar beschikbaarheid
- RRP: €246,84 (incl. BTW)
- Excl. BTW: €204,00